Warrior Interior and Exterior Alkyd Gloss Varnish
Warrior Interior/Exterior Alkyd Gloss Varnish
Warrior Interior/Exterior Alkyd Gloss Varnish is a wood varnish which enhances the natural beauty of wood. It dries to a clear high gloss finish and highlights the wood grain.
Warrior Interior/Exterior Alkyd Gloss Varnish is used on all wooden surfaces.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
Ensure that the surface to be coated is clean, free from dust, dirt, grease etc. Apply one coat Warrior Exterior Varnish. Allow to dry for 24 hours, sand lightly, remove all dust and apply a second coat. This product can also be tinted to a variety of wood stain colours to enhance the surface to be coated.
APPLICATION: Brush, Roller and Spray*
CLEANING SOLVENT: Mineral Turpentine
THINNING SOLVENT: Mineral Turpentine
- PRIMER COAT : 4-6 m² per litre (depending on wood surface)
- FINAL COAT : 8-10 m² per litre
- SURFACE DRY : 4 hours
- HARD DRY : 16 hours
- OVERCOATING : overnight
PACK SIZE: 1L, 5L
COLOUR RANGE: Clear only (selected colours on request)
SPECIFIC GRAVITY: 0,8 + 0,05 kg per litre
VISCOSITY: 60 sec F4
FLASH POINT: >35°C
GENERAL INFORMATION :
*For spray application consult our Technical Department.
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior Interior/Exterior Alkyd Gloss Varnish.