WarriorTex Heavy Textured Coating
WARRIORTEX™ Heavy Textured Coating
Back to Acrylic Based Paints
Warriortex™ Heavy Textured Coating is a high build heavy textured paint with a rough sand texture. It has been specially formulated to provide a hardwearing, decorative and protective finish.
Warriortex™ Heavy Textured Coating is designed for exterior use, specifically to hide imperfections and hairline cracks on plastered walls.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
On new plaster, apply one coat of Warrior Alkali Resistant Plaster Primer as a first coat. One or two coats of Warriortex™ Heavy Textured Coating can then be applied depending on the required finish.
For surfaces, which have previously been coated with an Acrylic P.V.A., ensure that the surface is prepared accordingly before applying one or two coats of Warriortex™ Heavy Textured Coating.
CLEANING SOLVENT: Water
THINNING SOLVENT: Not recommended
SPREADING RATE: Spreading rate will depend on the required finish, but an average of 1m ² per litre can be expected
- SURFACE DRY: 4 hours
- HARD DRY: 24 hours
PACK SIZE: 5L, 20L
- White and a range of popular
- Medium and deep colours
VISCOCITY: 140 Kreb units
FLASH POINT: Non flammable
RELATIVE DENSITY 1,40 ± 0,05 per litre
- A variety of textured effects can be obtained depending on the roller used.
- The product should not be thinned as it is supplied ready for use.
Contact us for the WarriorTex™ Heavy Textured Coating.