Warrior Interior and Exterior clear brick dressing
Warrior Interior/Exterior Clear Brick Dressing
Warrior Interior/Exterior Clear Brick Dressing is a synthetic resin based masonry coating which is simple to use, quick drying, and offers excellent resistance to yellowing and alkaline attack. It enhances the natural colour and restores depth to brickwork and slasto/slate surfaces, ensuring an attractive gloss and long lasting finish.
Warrior Interior/ Exterior Clear Brick Dressing can be applied to brick surfaces, slasto surfaces and tiles. This product is not suitable for trafficable areas.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
New masonry surfaces : Ensure that the surface is dry, free from all forms of dirt, sand and loose plaster or cement. Apply the first coat thinned 10-15% by volume with Turps. To finish apply one or more coats Warrior Brick Dressing to the surface as supplied.
For maintenance painting touch up areas as and when required.
APPLICATION: Brush, Roller, Spray
CLEANING SOLVENT: Mineral Turpentine
THINNING SOLVENT: Mineral Turpentine
- PRIMER COAT : 6-8m² per litre
- FINAL COAT : 8-10m² per litre
- SURFACE DRY : 1 hour
- HARD DRY : 6-8 hours
- OVERCOATING : 8 hours
PACK SIZE: 1L, 5L
COLOUR RANGE: Clear only
FLASH POINT: >35°C
VISCOSITY: 35 + 5 sec F4
SPECIFIC GRAVITY: 0,85 + 0,05 kg per litre
GENERAL INFORMATION :
a) Do not apply this product to surfaces which are continually damp.
b) Surfaces must be completely dry as any residual moisture in the substrate can result in blistering.
c) It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior Interior/Exterior Clear brick dressing.