Warrior Woodtreat Yacht Varnish
Warrior Woodtreat Yacht Varnish
Back to Warrior Woodtreat
Warrior Woodtreat Yacht Varnish is a clear gloss varnish with excellent resistance to wet and humid conditions and the ultra-violet radiation of the sun.
USES :
Warrior Woodtreat Yacht Varnish is ideal for use on yacht decks, railings, cabins, etc. It is also ideal for use on gates, doors, garden furniture, pergolas, fascias, weather boarding etc.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
SURFACE PREPARATION :
New Wood Surfaces : All surfaces must be sanded to a smooth surface, cleaned and dry.
Previously Treated Wood Surfaces : All painted or varnished surfaces must be stripped chemically or mechanically back to the bare wood). Sand bare wood to a smooth finish and ensure surface is clean, firm and dry before applying any natural wood finish
RECOMMENDED APPLICATION :
Always stir contents well before use and stir occasionally during use as well. Apply the 1 st coat thinned 10-15% by volume with Warrior Turps and allow 16-24 hours to dry. Apply the 2 nd coat and 3 rd coats
unthinned allowing 24 hours in between coats and sanding lightly between coats.
PROPERTIES :
APPLICATION: Brush / Roller / Spray
CLEANING SOLVENT: Mineral Turps
THINNING SOLVENT: Mineral Turps
SPREADING RATE:
- PRIMER COAT: 6 m² per litre
- FINAL COAT: 8-10 m² per litre
DRYING TIMES:
- SURFACE DRY: 3-4 hours
- HARD DRY: 16 – 24 hours
- OVERCOATING: 24 hours
PACK SIZE: 1L, 5L
COLOUR RANGE: Clear & tinted colours (Mahogany,
Light Oak, Dark Oak, Teak, Meranti
and Imbuia)
SPECIFIC GRAVITY: 0,90 + 0,05 kg per litre
VISCOSITY: 70-75KU
FLASH POINT: >35ºC
FINISH: Gloss
GENERAL INFORMATION :
a) For a durable finish it is recommended that a minimum 3 coats application be carried out.
b) It is recommended that a minimum of 3 coats be applied for a more durable finish.
c) It is important that this product be thoroughly mixed with a flat paddle before use
Contact us for the Warrior Woodtreat Yacht Varnish.