GENERAL INFORMATION :
*For spray application consult our Technical Department.
- Do not apply to bare metal surfaces.
It is important that this product be thoroughly mixed with a flat paddle before use.
Warrior General Purpose Acrylic PVA
Warrior General Purpose Acrylic PVA is a matt acrylic paint mainly for interior use with good filling and obliterating properties. It is ideal for use by contractors on projects where an economic finish with limited washability is required.
Warrior General Purpose Acrylic PVA has been specifically formulated for low cost housing, garages, concrete fencing and areas where economy is most important. Warrior General Purpose Acrylic PVA can also be used as a first coat on raw plaster or as a ceiling paint.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
On new plaster : Apply one coat Warriorfill™. Allow to dry for + 3 hours. Thereafter apply two coats Warrior General Purpose Acrylic PVA allowing 3-4 hours drying time between coats.
PROPERTIES :
APPLICATION: Brush, Roller, Spray*
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
SPREADING RATE:
- PRIMER COAT : 4-6 m² per litre
- FINAL COAT : + 6-8 m² per litre
DRYING TIMES:
- SURFACE DRY : 1 hour
- HARD DRY : 3-4 hours
- OVERCOATING : 3-4 hours
