Skip to main content
012 541 3596

Warrior Pink Wood Primer

Warrior Pink Wood Primer

DESCRIPTION:

Warrior Pink Wood Primer is an Alkyd/Oil based wood primer which penetrates and seals the wood providing an excellent primed surface for subsequent decorative finishes. It provides an excellent balance between filling, penetration and adhesion and is easy to apply.

USES:

Warrior Pink Wood Primer is designed for use on all types of interior/exterior wood surfaces.

SPECIFICATION OR RECOMMENDED PAINT SYSTEM:

Ensure surface to be coated is clean and dry, free from dust, oils and grease etc. Apply one coat of Warrior Pink Wood Primer, leave to dry for 24 hours, then sand lightly for a smooth finish. Dust off and apply the Warrior finishing coat of your choice.

PROPERTIES:

APPLICATION: Brush, Roller
CLEANING SOLVENT:   Water
THINNING SOLVENT:            Water
SPREADING RATE: PRIMER COAT: 4-6 m² per litre

FINAL COAT: Depending on the porosity of the surface, ±4-6 m² per litre
DRYING TIMES: SURFACE DRY: 1 hour
HARD DRY: 4 hours
OVERCOATING: 4 hours
PACK SIZE: 20L (200L on request)
COLOUR RANGE White
VISCOSITY: 120-125 KU
RELATIVE DENSITY 1, 42 ± 0, 05 kg per litre

 

GENERAL INFORMATION:

*For spray application, contact our Technical Department.

  1. a) This product may be over coated with conventional decorative enamels and undercoats.
  2. b) It is impor­tant that this product be thoroughly mixed with a flat paddle before use.
  3. c) As per standard painting practices, no painting should take place if surface or ambient temperatures are below 10⁰C or above 30⁰C. Painting should cease at 3pm or when rain is imminent.

Contact us for the Warrior Pink Wood Primer.