First Choice High Cover PVA
First Choice High Cover P.V.A
First Choice High Cover P.V.A is an economical P.V.A. formulated mainly for the contracting market. First Choice High Cover P.V.A has good all round properties i.e. obliteration, filling, drying and overcoating.
First Choice High Cover P.V.A. is an economical first coater for raw plaster walls, or as a first and final coating for ceilings. This product is used extensively on low cost housing projects.
SPECIFICATION OR RECOMMENDED PAINT SYSTEM :
Ensure all surfaces to be painted are clean and free from dust, moisture, grease, etc. When used as a primer on raw plaster, apply one or two coats of First Choice High Cover P.V.A., depending on porosity of the surface. For ceilings apply one coat of First Choice High Cover P.V.A as a primer coat and finish with two coats of First Choice High Cover P.V.A. Allow the First Choice High Cover P.V.A. to dry for ± 4 hours before overcoating.
APPLICATION: Brush, Roller
CLEANING SOLVENT: Water
THINNING SOLVENT: Water
- PRIMER COAT : 4-6 m² per litre
- FINAL COAT : Depending on porosity of surface, ±4-6 m² per litre
- SURFACE DRY : 1 hour
- HARD DRY : 4 hours
- OVERCOATING : 4 hours
PACK SIZE: 5L, 20L (200L on request)
COLOUR RANGE White
VISCOSITY: 128-130 KU
RELATIVE DENSITY 1,40 ± 0,05 kg per litre
GENERAL INFORMATION :
It is important that this product be thoroughly mixed with a flat paddle before use.
Contact us for the Warrior First Choice High Cover P.V.A.